Product of Bender

PEM5xx Power Analyzer

The main advantages of PEM5xx Power Analyzer are as described below:

  • Class 0.5s energy reading according to IEC 62053-22 standard
  • Harmonic measurements up to 31th component
  • Modbus-RTU and Modbus-TCP Communication options

PEM5xx Power Analyzer carries out current and voltage harmonic measurements up to 31th component to make in depth analysis of the electrical infrastructure. Network Analyzer enables users to monitor distortions on electricity grid and allows supplies detailed analysis with voltage, current, frequency and power measurements. It is possible to measure current and voltage with 0.2% class. Based on these measurements, Class 0.5s energy measurement according to the standard IEC 62053-22 can be obtained. This accuracy level is used in industrial electricity meters to measure energy consumed.

When used PEM5xx Power Analyzer, measured values can be gathered and monitored in ActWin Smart software via Modbus-RTU and Modbus-TCP/IP protocols and they can easily be seen on built-in LCD.

It is possible to have 6 digital inputs and 3 digital outputs on Network Analyzer. These outputs can be programmable according to digital input states or measurements like current, voltage. They can be used for measuring and controlling purposes on automation systems.

Energy is measured in two directions with import and export energy. Neutral current is also calculated and shown. There is a password protection in settings menu of the device where settings like connection type, communication etc. is done to prevent unauthorized access.

PEM5xx Power Analyzer dimensions are 96x96 which is commonly used. Measurement sampling frequency in PEM533 is 3,2 kHz and 6,4 kHz in PEM555.

PEM5xx Power Analyzer | Technical Features and Parameters

Technical specifications and parameters of Network Analyzer are described below:

PEM5xx Power Analyzer | Parameters

Measurement parameters of Network Analyzer are listed below:

  • V (L-L), V (L-N) for each phase and average
  • Current for each phase and neutral current 
  • Active, reactive, apparent power
  • Import/Export Active and reactive energy
  • Power factor,  cos(φ)
  • Frequency
  • Harmonic measurements (up to 31.th)
  • Voltage and current unbalance rates

PEM5xx Power Analyzer | Technical specifications

Technical Features of Network Analyzer:

  • Class 0.5s for active energy 
  • Auxiliary supply interval 95 ... 250 VAC
  • 3x230/400 V, X/5 A, 45-65 Hz measurement input
  • IP54 protection class (Front Panel)
  • 6 Digital inputs, 
  • 3 Digital output
  • Dimensions: 96x96 mm

PEM5xx Power Analyzer | Multimeter Model and Options

  Installation Communication Digital Input Digital Output
PEM533 96x96mm Modbus-RTU 6 2
PEM555 96x96mm Modbus-RTU
Modbus-TCP
6 3

Visit the Power Analyzers & Quality Recorders category from PEM5xx Power Analyzer page or go back to Products & Services page