The Branch Current Balancing Devices, LV busbar, MV busbar, LV distribution panel etc. with very low impedance. temperature rise test of distribution systems etc. It is used to adjust the rated currents of the busbars and/or the functional units on these busbars very quickly and easily during the loading tests. The device has 3 independent test outputs with a maximum capacity of 1000 A and a minimum of 250 A. These outputs can be connected to test samples with a rated current of up to 1000 A.
LV busbar, MV busbar, LV distribution panel etc. temperature rise test of distribution systems etc. Load tests are performed by ensuring that the declared rated current flows through the busbar. During these tests, it is also checked whether the distribution busbars connected to the main busbar and its main functional units and the functional units on these distribution busbars can withstand their own rated currents during the test. It must be ensured that branch currents pass through all distribution busbars and functional units on these distribution buses. Branch Current Balancing Device is used to adjust the branch currents at the distribution points.
The method used by laboratories to adjust branch currents at distribution points requires hours of experimentation to adjust the branch current at only one distribution point. By connecting a Branch Current Balancing Device to each distribution point, the impedance at the distribution point is adjusted quickly and easily. Thanks to the Branch Current Balancing Device, it is possible to adjust the branch currents at the distribution point within a few minutes.
Usage areas
Branch Current Balancing Device is generally used in test applications of busbar systems.
- LV busbar, MV busbar, LV distribution panel etc. temperature rise test of distribution systems etc. In loading tests,
- It is used to adjust the rated currents of distribution busbars and/or functional units on these distribution busbars.
Advantages
- It has an aesthetic cabinet that does not take up much space, specially designed for 250 A, 630 A, 1000 A current capacities.
- All outputs of the device are independent from each other. In this way, each power terminal can be adjusted independently of each other.
- The impedance at the distribution point is adjusted quickly and easily.
- It can be transported by forklift.
- It has a special structure that is resistant to rapid cooling, overloads and electrical forces.
- Arm Current Balancing Device offers the best solution with its easy installation and fast adjustment performance. It saves 100% time compared to the methods used in laboratories.
- There is no need for any network for the Branch Current Balancing Device to operate. It works by connecting directly to the test sample.
Technicial Specifications
| Cabinet Material | Electrostatic Paint on Steel Sheet |
| Rated Current | 250 A, 630 A, 1000 A |
| Ambient temperature | 3 kV / 1 dk |
| Isolation | -5.......+50 |
| Degree of Protection | IP20 |
| Dimensions (Width x Length x Height) | 400x800x1100 mm |
| Type | Size | Download Link | |
| TDH - High Current Test Devices | 1 MB | Download |
